Ремонт SSD накопителей на контроллерах SandForce (часть 3) (938) /

SnowWorm:
А как бороть ошибку FATAL_ERROR: DiagUnlock failed. Exiting... (285212673) при MST/DISPLAY_CDU?

Vertex3, что с перемычкой, что без. При этом диск нормально шьется


Цитата:

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ argv[1]: -MST argv[2]: 0:0:0:0 argv[3]: -START=W:4:1200:0xFFEE:1:0:1:6Gbps:1200:20:0:1:0::1 argv[4]: LOG=./MST_RESULT_2018-07-08-16-54.log ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Sun 07/08/2018 16:54:46] - Instructing the operating system to purge any existing cached data for device: '0:0:0:0' [Sun 07/08/2018 16:54:51] - Issuing a discovery command for device: '0:0:0:0' [Sun 07/08/2018 16:54:56] - Discovery command completed... [Sun 07/08/2018 16:54:56] - Waiting 5 seconds for the system to settle... [Sun 07/08/2018 16:55:01] - Device designation string '0:0:0:0' is mapped to node '/dev/sg0' [Sun 07/08/2018 16:55:01] - Proceeding to perform the requested MST operation on device: /dev/sg0 [Sun 07/08/2018 16:55:02] - FATAL_ERROR: DiagUnlock failed. Exiting... (285212673) [Sun 07/08/2018 16:55:02] - End of Genesis manufacturing log. [Sun 07/08/2018 16:55:02] - Exiting...

Цитата:

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ argv[1]: -DISPLAY_CDU argv[2]: 0:0:0:0 argv[3]: -TRANSLATED argv[4]: -LOG=cdu_2018-07-08-16-50.log ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Sun 07/08/2018 16:50:03] - Instructing the operating system to purge any existing cached data for device: '0:0:0:0' [Sun 07/08/2018 16:50:08] - Issuing a discovery command for device: '0:0:0:0' [Sun 07/08/2018 16:50:13] - Discovery command completed... [Sun 07/08/2018 16:50:13] - Waiting 5 seconds for the system to settle... [Sun 07/08/2018 16:50:18] - Device designation string '0:0:0:0' is mapped to node '/dev/sg0' [Sun 07/08/2018 16:50:19] - FATAL_ERROR: DiagUnlock failed. Exiting... (285212673) [Sun 07/08/2018 16:50:19] - End of Genesis manufacturing log. [Sun 07/08/2018 16:50:19] - Exiting...

UPD: в параметрах этих команд нет ни драйвконфига, ни мастер-пароля (как в SecureErase) как же он анлокает без знания мастер-пароля?